Frigidaire WF2CB PureSource2 Ice And Water Filtration System, 1 Pack
Frigidaire WF2CB PureSource2 Ice And Water Filtration System, 1 Pack
- Reduces chlorine taste and order as well as sediment
- Removes 99% of Cysts, Lead and Turbidity. This Frigidaire filter does not remove Fluoride
- Features slide in – out technology for easy replacement
Fits all Frigidaire & Kenmore refrigerators with a slide out filter cartridge Replaces Frigidaire part number FC-100, FC100, and Sears Kenmore 46-9911 Should be replaced every 9 months
Rating: 
(out of 74 reviews)
List Price: $ 39.95
Price: $ 28.00
Find More Products
Review by Greg S for Frigidaire WF2CB PureSource2 Ice And Water Filtration System, 1 Pack
Rating:
I have had my Frigidare refrigerator for about 5 years now. The filters used to have a thick housing over the two smaller cylinders and it worked wonderfully. I never experienced any problems with those filters. About 2 years ago they changed the design taking away the outer housing leaving only the two smaller cylinders. Since then I have been through 8 filters in two years. When you cover the outlet hole and blow into the inlet hole, you can see the water spirt out of the side of the cartridge. It doesn’t always occur at the top seal; however, many times the leak is in the plastic but you can see where the seam glue has run down to the spot where it’s leaking. It appears that the glue they are using is dissolving the weak plastic and causing it to leak. I’m not sure what you can do about it but I just save my receipts and take them back about every 2-4 months when they fail. It’s a pain but the manufacturer won’t do anything about it. I just won’t buy another Frigidare in the future!
Review by Becky for Frigidaire WF2CB PureSource2 Ice And Water Filtration System, 1 Pack
Rating:
This product is an exact match for my Frigidaire. It slid right in and after a few glasses running through the system (to get rid of the air bubbles) things are running perfect again.
Review by Buyer for Frigidaire WF2CB PureSource2 Ice And Water Filtration System, 1 Pack
Rating:
This is the filter for a specific model of the Frigdaire. I liked the ease of finding the data on which one, how to order, the prices, etc.
It was an excellent price for the 3 pack, saving us over $50 based on the replacement cost of our local dealer.
Review by Xian for Frigidaire WF2CB PureSource2 Ice And Water Filtration System, 1 Pack
Rating:
These filters are a little smaller than the previous ones I ordered (probably a different manufacturer or maybe using less plastic to be environmentally friendly) but nonetheless fit and work well. Remember to run the water through the system for several minutes after installation to ensure proper filtration (and to get loose fibers from the filter out)!
Review by Günther for Frigidaire WF2CB PureSource2 Ice And Water Filtration System, 1 Pack
Rating:
This filter is for my Frigidaire Side-by-side, 26.0 cu ft, Stainless Steel refrigerator. Model # FRS6LF7JS0, S/N: 4A81707239. Manufactured April 2008.
I first operated the water dispenser on 08JULY08. After the RED light came on to change the filter, I kept putting it off…over and over until I became accustomed to seeing the pretty RED light. It complemented the GREEN ice dispenser light very well, especially during the winter holidays.
I finally purchased the replacement filter and replaced it on 14MAY10…yes, that’s right, 22 months of filtering and at least 13 months overdue for a change. The filter, being see-through, allowed me to see the bits (albeit small) of debris that floated about when I shook the old filter. It was something of a gagging effect I experienced in my thoughts. I should have changed the filter a lot sooner was the thought thereafter.
The point I wanted to single out is that even though the filter would definitely not pass a health inspection, the water that came out through it was relatively clear…I mean it! I would have never known that the filter was mucked-up had it not been for the RED “change me now!” light. Therefore, this filter is a very good filter.
However, the manufacturer states that this filter is to be replaced after 6-9 months of use or after a flow of 400 US Gallons, whichever comes first. I am assuming that the RED “change me now!” light is initiated by the filter backing up (Differential Pressure a.k.a. Delta-P), if not by this means, then perhaps by a flow meter? Whichever it may be, change your filter when the manufacturer says so. The price is high per unit, but if you were to change the filter out every 6 months, the price per day is approximately $0.19 (approximately $0.13 if every 9 months).
After you install the new filter, the manufacturer says to run water through the filter for 3 minutes. This will cycle out the air in the new filter and kind of give it a rinse at the same time. The water, at first, will come out somewhat like heavily diluted milk, due to the teeny-tiny air bubbles making their way out.
Don’t forget to reset your RED filter light (if you have one)!